KDX250 cylinder

I bought a 92 kdx250 with a damaged cylinder. One of the transfer ports
has some quite bad chips around it due to one of the crank bearings
shattering. I know the kdx uses a plated bore and so i'm not sure what
can be done with it. Anyone suggest anything that could be done to
repair it?

Cheers
Greg

Squeet wrote:
> I bought a 92 kdx250 with a damaged cylinder. One of the transfer ports
> has some quite bad chips around it due to one of the crank bearings
> shattering. I know the kdx uses a plated bore and so i'm not sure what
> can be done with it. Anyone suggest anything that could be done to
> repair it?
>
> Cheers
> Greg

Try Stan Stevens, he can do repairs and bore coating and has a good
reputation.

Can't find him on line but hopefully someone can advise....