On Wed, 24 Sep 2003 23:23:35 +0100, "John Griffiths"
<johngriffithsmyknickers.TakeThisOut@ic24.net> wrote:
>I want to put some progressive fork springs in my bandit. Is it just a case
>of undoing the cap in the top of the forks and pulling one out and putting
>the other in?
>
> JOHN
>
No, there are damper rods that extend through the springs. A
nut and retaining washer have to be removed once the cap is off.
It's best to change the fork oil at the same time as the
springs. Get a liter of good 10wt or 15wt fork oil, and remove the
fork tubes from the steering head. (There's no drain plug).<!-- ~MESSAGE_AFTER~ -->
FAQ
Profile
Private Messages
Log in
